Mechanical Thermostats
N4X-40
The N4X-40 is designed for use as a cost-effective, preset control thermostat for freeze protection applications requiring pipewall or tankwall sensing. A nonmetallic NEMA 4X enclosure provides watertight, dusttight and corrosionresistant protection to the tamperproof, factory-set thermostat switch. All exposed hardware is stainless steel. Operating Voltage: 125, 250, . or 480 VAC. Maximum Operating Temperature: 40°F
4X/7-350235JB
Equipped with a double-pole switch, is designed for use as an adjustable control thermostat for freeze protection and temperature maintenance applications requiring pipewall or tankwall sensing. Operating Voltage: 125 - 277 VAC
B4X-15140 and B7-15140
An epoxy polyamide coated die-cast aluminum NEMA 4X enclosure provides watertight, dusttight and corrosion-resistant protection to the thermostat switch.
E4X-25325 and E7-25325
An epoxy polyamide coated die-cast aluminum NEMA 4X enclosure provides watertight, dusttight and corrosion-resistant protection to the thermostat switch.
E4X-35235 and E4X-1
A nonmetallic NEMA 4X enclosure provides watertight, dusttight and corrosion-resistant protection to the thermostat switch.
E4X/7-35235JB and E4X/7-200600JB
Designed for use as an adjustable control thermostat for freeze protection and temperature maintenance applications requiring pipewall or tankwall sensing.
Operating Voltage: 125 - 480 VAC
N-7-G-040 and N-7-HD-040
Preset Bimetallic Snap-Disc Control Thermostat. Designed for use as a cost-effective, preset control thermostat for freeze protection. Operating Voltage: 120 - 240 VAC / 120/240/277 VAC
Control & Monitoring Modules
TA 2100
The TA 2100 is a microprocessor-based control and monitoring module developed specifically for heat tracing. The unit provides control and monitoring capabilities via digital information display for one heat tracing circuit with input from two RTD's.
TC 101a, TC 201a, TC 202a
Control & Monitoring Module
Single and Dual Point Microprocessor-based temperature control and monitoring modules developed specifically for heat tracing.
TC 1818a
Control & Monitoring Module
Multicircuit microprocessor-based temperature control and monitoring module developed specifically for heat tracing. It can be configured for up to 18 circuits.
CVM-12
Monitoring Module. The CVM-12 is a microprocessor-based multipoint module developed specifically for cost-effective heat tracing monitoring. Operating Voltage: 120 or 240 VAC
ETI Snow Melting Controls:
The APS-4 provides effective, economical automatic control of snow melting systems including those for gutter and down spouts.
The APS-3B provides effective, economical automatic control of snow melting applications for walkways, ramps, driveways, gutters and downspouts.
The LCD-1 Snow Switch is ideally suited for cost-sensitive residential and commercial snow melting applications.
The computerized GIT-3A Automatic Gutter Ice Melting Control operates ice melting heaters only while required thus insuring energy efficiency and low operating costs.
The computerized GIT-4 Automatic Gutter Ice Melting Control operates ice melting heaters only while required thus insuring energy efficiency and low operating costs.
|