|
Phone: 440-684-0601
Fax: 440-684-0656
Toll Free: 800-468-5404
|
|
Hughes-Primeau Controls celebrates the life and work of Henry G. Hughes
1933-2006
|
Hughes-Primeau Controls combines 155+ years of selling engineered heat tracing solutions with over 50 years of experience from Thermon.
"Committed to providing a positive Customer experience every time"
A Drug Free Workplace
Copyright 2009 Hughes-Primeau Controls, Inc. All rights reserved
|
The Pribusin MTS series - a modular wireless telemetry system that is completely flexible and field expandable without any programming requirements. All modules feature an integrated power & data bus that makes assembly a ‘snap’. 1 Watt 900 MHz spread spectrum operation is license-free and achieves 12+ miles Line-of-Sight. Repeaters are available to further extend the range or to get around obstructions. PLC interfacing is also possible using MODBUS. Installation is extremely easy and no prior radio knowledge is required.
Available as modules for existing enclosures or in NEMA 4X pre-assembled systems. Currently available I/O modules: AnalogIN, AnalogOUT, DigitalIN, DigitalOUT, more to be added.
|
|
|
|
|
|
 Radio Module
 902-928 MHz
 License-Free
 12+ Miles
|
 (8) Digital Inputs
 Input Indication
|
 (8) Digital Outputs
 Output Indication
 Output Fail Selection
|
 (4) Analog Inputs
 4-20mA Sink or Source
 2-,3-,4-Wire Connection
|
 (4) Analog Outputs
 4-20mA Sink or Source
 1.5kV Isolation
|
Pribusin’s Telemetry System Makes It Easy to Monitor and Control Processes Remotely
We make remote monitoring and controlling processes easier than ever with our line of radio telemetry units. All of our RCI series units can send and receive digital and analog signals from one or several remote sites via phone line, Ethernet/Internet, serial or radio.
Our wireless telemetry products are exceptionally easy to deploy. These radio telemetry units allow you to easily monitor and control process applications without the need for burying wires. Our units come in one, two, four and eight channel sizes.
The radio telemetry and wired telemetry system operates either in a point-to-point or in a point-to-multipoint topology. In point-to-point mode, a host communicates with a single remote. In point-to-multipoint, a host communicates with several remotes.
Communication is via standard MODBUS protocol. This allows a PLC or PC to act as a host in larger remote monitoring applications.
Our optional solar power system is custom-engineered to provide power in remote locations. It can be used as an autonomous power source or as a stand-by power source.
So it doesn’t matter if you need a wireless telemetry unit or a hard-wired telemetry system. Pribusin has what you need.
For Example:
The RCI-100-RF9 is a bi-directional signal communication system that exchanges 1 analog (0-20mA) and 1 dry contact inputs between a master and a remote unit. A complete system consists of one master station and one remote station each with 1 analog inputs, 1 analog outputs, 1 dry contact inputs and 1 'C' relay contact outputs. This means that signals can be retrieved from the remote site for monitoring purposes and that signals can be sent to the remote site for direct control functions.
The wireless communication is via license-free (in USA and CANADA) 900MHz Spread Spectrum Radio using channel hopping technology for greater reliability. Line-of-Sight ranges of up to 12 miles can be achieved with these radios.
The RCI-100-RF9 may also be used as a remote in a multi-remote system where 1, 2, 4 or 8 remote units at different sites may communicate with one central master. The RCI-800-RF9 may be used to serve as the master.
|