|
Phone: 440-684-0601
Fax: 440-684-0656
Toll Free: 800-468-5404
|
|
Hughes-Primeau Controls celebrates the life and work of Henry G. Hughes
1933-2006
|
Hughes-Primeau Controls combines 135+ years of selling engineered heat tracing systems with over 50 years of experience from Thermon.
No other company in Ohio, Western Pennsylvania, or West Virginia
can match our heat tracing solutions, inventory, nor expertise.
A Drug Free Workplace
|
 Industrial Heat Tracing Products
Links to Thermon Products:
Self-Regulating Heating Cable
Self-Regulating Heating Cable, D1 Hazardous Areas
Power Limiting Heating Cable
Power Limiting Heating Cable, D1 Hazardous Areas
Parallel Constant Watt Heating Cable
Mineral Insulated Cable
Series Constant Watt Heating Cable
CLICK HERE FOR:
Our dedicated sales staff will assist in a complete design and takeoff of ALL of your heat tracing needs.
BSX
The BSX family of Thermon self-regulating heating cables provides the solution to freeze-protection and process-temperature maintenance applications. BSX heating cables maintain process temperatures up to 150°F (65°C) and can withstand intermittent exposure to temperatures up to 185°F (85°C). D1-RSX is Class I, Division 1 rated.
The heating cables are configured for use in nonhazardous and hazardous (classified) locations, including areas where corrosives may be present.
|
|
BSX Literature
|
Technology: Self-Regulating
Max. Maintain Temp.: 150°F (65°C)
Max. Exposure Temp.: 185°F (85°C)
Watts/Foot : 3,5,8,10, 15
Voltages: 110-130 Vac, 200-277 Vac
|

HTSX
The HTSX family of Thermon self-regulating heating cables are designed for pipe heat tracing in industrial applications. HTSX heating cables can provide process-temperature maintenance up to 250°F and can also be used for freeze protection in systems having high heat loss.
The heating cables are configured for use in nonhazardous and hazardous (classified) locations, including areas where corrosives may be present.
|
|
HTSX Literature
|
Technology: Self-Regulating
Max. Maintain Temp.: 250°F (121°C)
Max. Exposure Temps.:
Intermittent-Power on: 420°F (215°C)
Intermittent-Power off: 482°F (250°C)
Continuous-Power off: 400°F (205°C)
Watts/Foot: 3,6,9,12,15, 20
Voltages: 120 / 277 Vac
T-rating:
3,6,9,12, 15-2 W/ft .......T3 392°F (200°C)
15-1 and 20-1 W/ft ....T2D 419°F (215°C)
20-2 W/ft ...................T2C 446°F (230°C)
Based on stabilized design........ T3 to T6
|

RSX-15-2
The RSX family of Thermon self-regulating heating cables provides the solution to freeze-protection and process-temperature maintenance applications. RSX heating cables maintain process temperatures up to 150°F (65°C) and can withstand intermittent exposure to temperatures up to 185°F (85°C).
D1-RSX is Class I, Division 1 rated.
|
|
|
|
Technology: Self-Regulating
Max. Maintain Temp.: 150°F (65°C)
Max. Exposure Temp.: 185°F (85°C)
Watts/Foot : 8,15
Voltages: 200-277 Vac
|
VSX
The VSX family of Thermon self-regulating heating cables provides solutions for industrial freeze protection and process-temperature maintenance applications requiring high power output. VSX heating cables can withstand temperatures up to 450°F (232°C) and provide process temperature maintenance to 300°F (121°C).
The heating cables are configured for use in non-hazardous and hazardous (classified) locations, including areas where corrosives may be present.
|
|
VSX Literature
|
Technology: Self-Regulating
Max. Maintain Temp.: 300°F (121°C)
Max. Exposure Cont. Power on 400F
Max. Exposure Temp. 450°F (215°C)
Watts/Foot: 5,10,15,20
Voltages: 120 / 277 Vac
|

HPT
Power-Limiting Cables are used for applications requiring high power output or exceed the temperature ranges of self-regulating cables. HPT can be used for freeze protection and process-temperature maintenance requiring high power output and/or high temperature exposure. HPT can be run at 480 vac, enabling longer and fewer circuits on long length piping.
HPT can provide process-temperature maintenance up to 455°F (230°C) and can withstand routine steam purges and temperature excursions to 482°F (250°C) with power off. HPT cables are approved for use in non- hazardous and hazardous locations.
|
|
HPT Literature
|
Technology: Power-Limiting
Max. Maintain Temp.: 300°F (150°C)
Max. Exposure Temp.: 500°F (250°C)
Watts/Foot: 5,10,15, 20
Voltages: 120 / 277 / 480 Vac
|

FP
FP parallel resistance constant watt heating cables are designed to provide freeze protection or process temperature maintenance to piping, tanks and equipment.
Operating Voltage: 120 / 240 VAC
Maximum Operating Temperature: 150°F
|
|
FP Literature
|
Technology: Constant Wattage
Max. Maintain Temp.: 150°F (65°C)
Max. Exposure Temp.: 400°F (204°C)
Watts/Foot: 2.5,5, 10
Voltages: 120/240 Vac
For Ordinary and hazardous rated areas
|

MIQ
Alloy 825 Mineral Insulated Heating Cables provide solutions for industrial freeze protection and process-temperature maintenance applications in hazardous and non hazardous locations.
MI is also used where high power output, high exposure temperatures, or extreme resistance to environmental corrosives are needed. MI heating cables can provide up to 82 watts per foot (269 watts per meter) of power output with area classification and design approvals. MI heating cables are constructed and approved for use in non hazardous and hazardous (classified) The maximum application temperature for heating units is 932°F (500°C) and the maximum exposure temperature for the heating cable is 1100°F (593°C). Higher temperatures are available by special order.
|
|
MI Cable-Alloy 825 Literature
|
Technology: Mineral Insulated
Max. Maintain Temp.: 932°F (550°C)
Max. Exposure Temp.: 1100°F (670°C)
Watts/Foot: up to 80 w/ft
Voltages: 300-600 Vac
|

D1-BSX
The D1-BSX family of self-regulating heating cables provides the solution to freeze-protection and process-temperature maintenance applications for CID1 areas. D1-BSX heating cables maintain process temperatures up to 150°F (65°C) and can withstand intermittent exposure to temperatures up to 185°F (85°C).
The cables are configured for use in hazardous (CID1) areas, including areas where corrosives may be present.
|
|
D1-BSX Literature
|
Technology: Self-Regulating
Max. Maintain Temp.: 150°F (65°C)
Max. Exposure Temp.: 185°F (85°C)
Watts/Foot: 5,8,10
Voltages: 120 / 277 Vac
|

D1-HTSX
D1-HTSX self-regulating heating cables are designed for process temperature maintenance or freeze protection where elevated cold-start currents are unacceptable.
Maximum Operating Temperature: 250°F
The cables are configured for use in hazardous (CID1) locations including areas where corrosives may be present.
|
|
D1-HTSX Literature
|
Technology: Self-Regulating
Max. Maintain Temp.: 250°F (121°C)
Max. Exposure Temp.: 375°F (191°C)
Watts/Foot: 3,6,9,12
Voltages: 120 / 277 Vac
|

D1-VSX
High performance VSX self-regulating heating cables are designed specifically for process temperature maintenance or freeze protection where high maintain temperatures or high temperature exposure is required.
Maximum Operating Temperature: 300°F
All of the D1-VSX family of heating cables can be used in hazardous (CID1) locations, including areas where corrosives may be present.
|
|
D1-VSX Literature
|
Technology: Self-Regulating
Max. Maintain Temp.: 300°F (149°C)
Max. Exposure Temp.: 450°F (232°C)
Watts/Foot: 5,10,15, 20
Voltages: 120 / 277 Vac
|
D1-HPT
Power-Limiting Cables are used for applications requiring high power output or exceed the temperature ranges of self-regulating cables. HPT can be used for freeze protection and process-temperature maintenance requiring high power output and/or high temperature exposure.
HPT can provide process-temperature maintenance up to 455°F and can withstand routine steam purges and temperature excursions to 500°F with power off. HPT cables are approved for use in non- hazardous and hazardous locations.
|
|
D1-HPT Literature
|
Technology: Power-Limiting
Max. Maintain Temp.: 300°F (150°C)
Max. Exposure Temp.: 500°F (250°C)
Watts/Foot: 5,10,15, 20
Voltages: 120 Vac, 208-277 Vac
|

RT 
RT tank heating pads are designed for applications ranging from freeze protection to process-temperature maintenance of tanks. Thermon offers RT tank heating pads with two power densities, making them ideal for metal tanks (lined and unlined) and plastic tanks. Factory Mutual (FM) and the Canadian Standards Association (CSA) have approved RT tank heating pads for use in both non hazardous and hazardous locations. RTL may be used on tank walls capable of up to 185°F (85°C), and RTL may be used on tanks with walls capable of 280°F (138°C).
RT is offered with two power densities (-L and -H).
|
|
RT Literature
|
 |
|